Outdoor 2M Canvas 2-3 Person pyramid Tent with Double Door campig tipi tent

  

Open Size of tent: 7X7X6.5FT(215 x215x 200cm) Weight:26.4ibs(12kg). Size of door: 170cm (W) X 140cm (H). Fabric material: 285g/sqm beige cotton canvas with waterproof PU coating. Bottom material: Oxford cloth with waterproof PU coating.

Pole material: galvanized steel tube. There is a hook on the top of the tent to hang camping lights for easy lighting. The tent is equipped with a small storage bag, which can store mobile phones and small items.

Storage and packaging:When you want to put away the tent, please be sure to dry the tent first. Putting away the tent in a humid environment will easily cause the fabric to become moldy. Double doors for easy access. Both canvas flap doors are equipped with mesh screens for more ventilation.

There are four ventilation holes on the top of the tent to circulate air and maintain ventilation. 285g/sqm beige cotton canvas is used, the main body of the tent is made of PU 3000mm waterproof coating, and the non-removable 540g/sqm PVC base cloth; 19mm diameter galvanized steel pipe with 1mm wall thickness as the support rod. 1xtent cover, 4xgalvanized iron pipe, 8xgroundnail, 1x storage bag. It is recommended to use this tent on sunny days. Due to structural problems, the joints at the top intersection cannot be completely sealed, and use in heavy rain may cause water leakage at the top.

Easy to install, strong stability? Just insert all the rods into the casing, then fix the rod ends on the ground, and then configure the top rods in a clockwise direction and tie them. The tent can accommodate 2-3 persons.

Choose a flat ground, take out the tent from the carton, and then spread the tent flat on the campsite. Connect the 4 poles, and thread the poles clockwise into the cloth cover of the tent fabric. Put the iron buckles with loops on the four corners of the tent into the black rubber sleeve with round holes at the bottom of the pole. Fix the pole on the top of the tent with a webbing. Erect the tent, fix it with ground nails in turn, and complete the installation.